-
Please contact us for any additional information. <-- BACK TO PRODUCTS

Receding Head Presses

 

Model RB-30 RB-40 RB-60 RB-80 RB-100 RB-150 RB-200
Cutting Force 33 Tons 44 Tons 66 Tons 88 Tons 110 Tons 165 Tons 220 Tons
Max. cutting stroke 4.3" or 7.1" 4.3" or 7.1" 4.3" or 7.1" 4.3" or 7.1" 4.3" or 7.1" 4.3" or 7.1" 4.3" or 7.1"
Open daylight 6.3" - 7.9" 6.3" - 7.9" 6.3" - 7.9" 6.3" - 7.9" 6.3" - 7.9" 6.3" - 7.9" 6.3" - 7.9"
Main motor 5 Hp 5 Hp 7.5 Hp 10 Hp 15 Hp 20 Hp 25 Hp
Machine bed 23.0”D – 63.0”W 28.0”D – 63.0”W 28.0”D – 63.0”W 35.0”D – 63.0”W 35.0”D – 63.0”W 35.0”D – 63.0”W 35.0”D – 63.0”W
Weight approx. 7,700 lbs. 9,900 lbs. 11,000 lbs. 11,500 lbs. 16,500 lbs. 22,000 lbs. 27,500 lbs.

Specification Notes
  • Special specifications and CE version are available on request
  • Dimensions and Weights are for machine body only without feeder
  • Open daylight is measured from beam to bed. For effective open daylight, deduct thickness of die, cutting pad and feeder
  • Other sizes are available
  • Floor print provided upon request

Stationary Material Bed Delivers Precise Cuts

With the RB Series, the material is mounted on a stationary table that securely holds the material in place, avoiding any shifting problems. This means accurate and consistent cuts time after time.


Rack and Pinion Head-Speed Control Means Fast Cycle Time

A special rack and pinion head-speed control system allows quick head receding speed and adjustable receding distance to produce cycle times ranging from 3 to 4 seconds per cut. This system also ensures the receding head starts and stops smoothly at both ends, eliminating any shock or vibration.


Optional Command Photocell Increases Production and Reduces Operator Fatigue

Available as an option on the RB Series is the CE Compliance Type 4 Command Photocell, which features an operator detection and machine control function. The press can be run in the Auto 1 or Auto 2 operating mode, which means the photocell commands the press to start cutting after the operator reaches in to position material once or twice. This allows faster cycle times and saves operator movement, thereby reducing operator fatigue.


Unique Balancing System Reduces Wear On Cutting Dies and Pads

The RB Series extremely rigid construction with mechanical balancing keeps the head and bed parallel during the cutting stroke, ensuring clean, even cuts and reducing wear on dies and pads. The RB Series? two-speed cutting stroke provides maximum speed on the down stroke and accurate control of the cutting position to optimize production rates and extend pad and die life.


The RB Offers Scheduling Flexibility and Easy Maintenance

The RB can be set up and ready to run production in about 15 to 30 seconds, providing the flexibility to meet changing production schedules. A central self-lubricating system keeps maintenance to a minimum and helps maintain steady production output.


Additional Options:
  • 7.08" stroke, 9.06" daylight
  • CE compliance Type 4 command photocell for Auto 1and Auto 2 operationt
  • Four-post mechanical stops together with hardened and ground steel plate to achieve perfect kiss cut
  • Pneumatic die rails under the head
  • Pad shifter on machine bed or under head
  • Projector for accurate material loading position
  • Can be equipped with Allen-Bradley controls
  • Auto feed system options to increase productivity and reduce material cost
  • pinch roll feeder
  • clamp beam conveyor


> View Site Map